Vehicle Fixing Kit will secure the Caravan Safe in most vehicles. After installing a Vehicle Fixing Kit and fitting a Docking Stations to it, slide the Caravan Safe in and lock it with the supplied High Security Abloy Key. If your vehicle is broken into the Caravan Safe and the contents in it are THEFT PROOF.
PLUS, by entering entitles you to a Au$75.00 discount, details in the competition form.
Click here to enter for a chance to win a Caravan Safe. Will secure Passports, valuables, cash, jewellery in your Home. When you go on holiday remove the Safe Box from the Docking Station in your Home and slide it into the Docking Station in your Caravan or Motor Home. What an amazing High Security Safe...
Vehicle Fixing Kit - It cannot be emphasized enough just how crucial it is to secure your valuable possessions in your vehicle when you have to leave them unattended just as it is in your residential home, office, factory, caravan or motor home.
NB: Half way down this page we explain how to install the Vehicle Fixing Kits.
| Any home handyman should be able to install a Vehicle Fixing Kit with tools they already own. |
Vehicle Fixing Kits are available in two styles, depending on where in the vehicle the Vehicle Fixing Kit will be installed depends on which type is used.
| 1. | A Steel Bracket - manufactured from 3mm thick steel and powder coated black. The vertical backing plate of the steel bracket, as you can see in the picture below and to your left, is fitted with m5x8mm  high tensile clinch studs with shake proof washers and high tensile nuts to match the existing fixing holes in the Caravan Safe Docking Station.The clinch studs attached to the steel backing plate by pressing them through the steel under high pressure, making the back of the steel backing plate smooth. The advantage of this manufacturing technique is, having no nuts on the outside of the steel backing plate ensures if a thief does break into a vehicle fitted with a Vehicle Fixing Kit there are no nuts they can undo to remove the Caravan Safe. Depending on the vehicle make, model, year and type depends were the Vehicle Fixing Kit is installed eg. in the boot, under the front seat, in the back of a Hatch Back, in the rear of a 4 wheel Drive or Station Wagon. We have Vehicle Fixing Kits that are vertical, horizontal, on 30 and 45 degree angles. If one of our numerous Vehicle Fixing Kits cannot be installed in your vehicle we will custom design one for you FREE OF CHARGE. |
| 2. | A piece of Marine Ply that is fitted under a parcel shelf or flat to the floor in the boot. The Vehicle Fixing Kit / Docking Station picture to your left is a version that is installed under a parcel shelf as per the fitted one in the picture to your right. NB: Marine Ply is also used to secure a Docking Station under the front seat in some vehicles. |
For those times you need to secure two Caravan Safes in your vehicle there is no need to install two Vehicle Fixing Kits as we have an easier solution to achieve this.
 |
A Double Vehicle Fixing Kit. More pictures down the right hand side of this page. |
A Double Vehicle Fixing Kit is made from the same material and manufacture and finished as per the Steel Bracket Vehicle Fixing Kit, which you can read about above. We also have versions for most vehicles sold and if we have not previously designed one for your vehicle we will design one for you FREE OF CHARGE.
We have a new product for 2006 - a Twin Vehicle Fixing Kit. NB: Not available for all vehicles. The Twin Vehicle Fixing Kit is made from the same material and manufacture and finished as per the Steel Bracket Vehicle Fixing Kit, which you can read about above.
If you are interested in the Twin Vehicle Fixing Kit please select the option on our Enquiry / Quotation Form or Secure Order Form / Price List and we will let you know if one can be fitted into your vehicle. Go to our Secure Order Form / Price List for a complete price list of all our products and accessories and to place your order. Purchase one of our Special Offers and SAVE $100.00.
Click any of the three pictures below to view the full size version. Click the 'Back' button on your browser to return to this page.
|
Twin Vehicle Fixing Kit that will secure two Safe Boxes, one each side. |
Twin Vehicle Fixing Kit - for when you need to secure two Safe Boxes in a vehicle. |
Twin Vehicle Fixing Kit with two Safe Boxes, one being pulled out. |
Whether the Vehicle Fixing Kit is a Steel Bracket or Marine Ply version once the Caravan Safe is slid in and locked with either an Abloy Classic Lock or an Abloy PROTEC Lock the Caravan Safe is absolutely secure and THEFT PROOF.
When the Caravan Safe is slid into the Docking Station, that has been previously fitted to the Vehicle Fixing Kit and locked with the supplied Abloy High Security Key all the fixings used to install the Vehicle Fixing Kit are inaccessible. How ingenious is that...
The price for a Vehicle Fixing Kit DOES NOT INCLUDE a Docking Station. If you intend to install the Docking Station that is included with the Caravan Safe in your residential home, office, factory, caravan or motor home and you also purchase a Vehicle Fixing Kit you will need to purchase another Docking Station to be fitted to the Vehicle Fixing Kit.
When purchasing a Vehicle Fixing Kit, for your convenience, we will fit a Docking Station to the Vehicle Fixing Kit FREE OF CHARGE before it leaves our factory.
Go to our Secure Order Form / Price List for a complete price list of all our products and accessories and to place your order. Purchase one of our Special Offers and SAVE $100.00.
When installing a Vehicle Fixing Kit first, remove the Docking Station from it by undoing the high tensile nuts and washers securing it. Then install the Vehicle Fixing Kit to your vehicle, finally fit the Docking Station back onto the Vehicle Fixing Kit Steel Bracket by screwing the high tensile nuts and washers back onto the Vehicle Fixing Kit clinch studs.
| For recommended fixings to install the Caravan Safe go to: How To Install The Caravan Safe |
When you receive the Marine Ply Vehicle Fixing Kit a Docking Station has already been securely fitted to it. Do not remove it. All that is required to fit it to your vehicle is:
|
Hold the Marine Ply Vehicle Fixing Kit to the position it is going to be installed to, this is normally under the parcel shelf or to the floor in the boot and in some vehicles to the floor under the front passengers seat. |
|
With a pencil mark the position where you are going to place all the fixings on the Marine Ply Vehicle Fixing Kit. |
The Following Is Only A Guide About How To Install
|
A Docking Station - a minimum of 3 fixings, preferably 4 at the front and preferably 4 fixings at the rear. |
|
A Double Docking Station - a minimum of 5 fixings, preferably 6 spaced evenly along the front and preferably 6 fixings at the rear. |
NB: Some vehicle makes / models have punched out electrical wiring access holes in the steel parcel shelf frame which may coincide with a chosen fixing location. Simply bypass that location and place your chosen fixing as close as possible to the punched out hole.
NB: The front fixings must be located inside the Docking Station to enable the Safe Box to slide in unhindered.
|
Pre-drill a pilot hole through the Docking Station and the Marine Ply at the front and through the Marine Ply at the rear. |
NB: You may also use existing screw hole positions in the front of the Docking Station if any are more convenient to use. To do this remove existing screw / s and replace them with your chosen fixing whether being a high tensile bolt and nut, security screw or tek screw. Use your chosen fixing through the Marine Ply at the rear.
NB: Different vehicle makes / models may require different lengths of Marine Ply. If the Marine Ply supplied is a little too long for any unexplained reason, simply cut it back to the required length.
|
Depending on how you intend to screw the fixings in (either by hand or with a drill with the appropriate screwdriver bit in it) depends on what you do next. |
|
If using a drill with a screwdriver bit, hold the Marine Ply Vehicle Fixing Kit in position and screw the first fixing through the parcel shelf, to the floor in the boot or to the floor under the front seat. Once in position screw in the remain fixings. |
|
If screwing by hand, you will have to pre-drill the parcel shelf, the floor in the boot or to the floor under the front seat and then screw the fixings in by hand. |
NB: If installing flat to the floor in the boot, you must make sure that:
|
You are fixing into a steel floor pan or chassis. Fixing to cardboard or timber floor or to a polystyrene infill, as are in some vehicle makes and models, IS NOT acceptable under any circumstance. |
|
When fixing to a totally flat surface with full steel support underneath and to the floor with carpet or rubber matting eg. under front seat, then the Marine Ply maybe able to be substituted in some vehicles with either. |
|
A 6mm ply base. This keeps the Docking Station on a flat surface and takes out any uneven pressure exerted when installing to the floor. |
|
OR - A 3mm steel plate when the surface is slightly undulating such as under the front seat in some vehicle makes and models. |
| For recommended fixings to install the Caravan Safe go to: How To Install The Caravan Safe |
When installing a Vehicle Fixing Kit YOU MUST FIRST CHECK what is underneath or behind the position of installation before you drill the first hole to ensure your chosen fixing will not penetrate for example, the petrol tank or electrical wiring.
Some vehicles cannot be fitted with a Vehicle Fixing Kit for various reasons (loan cars etc). To over come this we have another High Security Solution that requires no permanent fixing to a vehicle or other temporary locations (such as a motel room) and is as secure as a fitted Vehicle Fixing Kit called a Shroud and Cable.
Once a Docking Station has been fitted to the Shroud and Cable the Caravan Safe can be slid into it and locked with the supplied High Security Abloy Key. Detailed information about the Shroud and Cable...
|
Go to Secure Order Form / Price List for a complete price list of all our products and accessories and to place your order. Purchase one of our Special Offers and SAVE $100.00. |
|
OR - Do you require a quotation and / or information sent to you? Go to Enquiry / Quotation Form. |
|
OR - For further information about the Caravan Safe please contact us. |
|
OR - Keep reading through this Web Site to learn about the Caravan Safe and WHY YOU MUST, for your own protection, secure your valuables in your Caravan, Motor Home or Vehicle when they are left unattended. This can be achieved by purchasing the World's only Relocatable, High Security, Light-Weight, Australian designed, manufactured and very cost effective, Caravan Safe. |
| Don't let thieves spoil your holiday. |
The Caravan Safe is the same safe sold to
secure Hand Guns in Police, Security and private vehicles.
 |
 |
|
| Open click here. | Open click here. |
Click pictures to
enlarge and
read description.
Vehicle Fixing Kit Steel Bracket. Showing the m5x8mm clinch studs on backing plate and the Type 17 Wood Tek Screws with full thread and 5/16 inch Hex Head used to fit to the floor in a Jackaroo 4 WD.
Vehicle Fixing Kit Steel Bracket with Docking Station secured to it, installed to the floor in a Jackaroo 4 WD.
Docking Station bolted to an Angled Vehicle Fixing Kit in the back of a Toyota Landcruiser 110 Series.
Safe Box secured in Angled Vehicle Fixing Kit in the back of a Toyota Landcruiser 110 Series.
Safe Box secured to a Marine Ply Vehicle Fixing Kit under the parcel shelf in the boot of a Commodore Sedan VT / VY.
Double Docking Station secured to a Marine Ply Vehicle Fixing Kit under the parcel shelf in a BMW.
Double Vertical Vehicle Fixing Kit with a Double Docking Station fitted to it and a Safe Box fitted under the parcel shelf in the boot of a Fairlane AU.
Two Safe Boxes secured in a Double Docking Station under a parcel shelf using a Marine Ply Vehicle Fixing Kit.
Angled Vehicle Fixing Kit with a Double Docking Station fitted to it. Will secure two Safe Boxes.
Vertical Vehicle Fixing Kit with Double Docking Station secured to it. Will secure two Safe Boxes.
Back view of a Double Vertical Vehicle Fixing Kit that shows how the clinch studs are flush with the back.
